创客百科

姿势共享,有节操无门槛参与的创客百科,创客动力之源 \ (^_^) /

用户工具

站点工具


en:arduino:libraries:liquidcrystalconstructor

差别

这里会显示出您选择的修订版和当前版本之间的差别。

到此差别页面的链接

en:arduino:libraries:liquidcrystalconstructor [2016/12/25 22:15] (当前版本)
行 1: 行 1:
 +[[en:​arduino:​libraries:​liquidcrystal|LiquidCrystal]]
 +====== LiquidCrystal() ======
  
 +
 +===== Description =====
 +
 +Creates a variable of type LiquidCrystal. The display can be controlled using 4 or 8 data lines. If the former, omit the pin numbers for d0 to d3 and leave those lines unconnected. The RW pin can be tied to ground instead of connected to a pin on the Arduino; if so, omit it from this function'​s parameters.
 +===== Syntax =====
 +<​code>​
 +LiquidCrystal(rs,​ enable, d4, d5, d6, d7) 
 +LiquidCrystal(rs,​ rw, enable, d4, d5, d6, d7) 
 +LiquidCrystal(rs,​ enable, d0, d1, d2, d3, d4, d5, d6, d7) 
 +LiquidCrystal(rs,​ rw, enable, d0, d1, d2, d3, d4, d5, d6, d7)
 +</​code>​
 +===== Parameters =====
 +
 +rs: the number of the Arduino pin that is connected to the RS pin on the LCD
 +
 +rw: the number of the Arduino pin that is connected to the RW pin on the LCD (optional)
 +
 +enable: the number of the Arduino pin that is connected to the enable pin on the LCD
 +
 +d0, d1, d2, d3, d4, d5, d6, d7: the numbers of the Arduino pins that are connected to the corresponding data pins on the LCD. d0, d1, d2, and d3 are optional; if omitted, the LCD will be controlled using only the four data lines (d4, d5, d6, d7).
 +===== Example =====
 +<code cpp>
 +#include <​LiquidCrystal.h>​
 +
 +LiquidCrystal lcd(12, 11, 10, 5, 4, 3, 2);
 +
 +void setup()
 +{
 +  lcd.print("​hello,​ world!"​);​
 +}
 +
 +void loop() {}
 +</​code>​
 +
 +[[en:​arduino:​libraries|Reference Home]]
en/arduino/libraries/liquidcrystalconstructor.txt · 最后更改: 2016/12/25 22:15 (外部编辑)