创客百科

姿势共享,有节操无门槛参与的创客百科,创客动力之源 \ (^_^) /

用户工具

站点工具


en:arduino:libraries:ethernetudpremoteip

Ethernet : UDP.remoteIP()

UDP.remoteIP()

Description

Gets the IP address of the remote connection.

This function must be called after UDP.parsePacket().

Syntax

UDP.remoteIP();

Parameters

None

Returns

4 bytes : the IP address of the remote connection

Example

#include <SPI.h>        
#include <Ethernet.h>
#include <EthernetUdp.h>
 
// Enter a MAC address and IP address for your controller below.
// The IP address will be dependent on your local network:
byte mac[] = {  
  0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
IPAddress ip(192, 168, 1, 177);
 
unsigned int localPort = 8888;      // local port to listen on
 
// An EthernetUDP instance to let us send and receive packets over UDP
EthernetUDP Udp;
 
void setup() {
  // start the Ethernet and UDP:
  Ethernet.begin(mac,ip);
  Udp.begin(localPort);
}
 
void loop() {
 
  int packetSize = Udp.parsePacket();
  if(packetSize)
  {
    Serial.print("Received packet of size ");
    Serial.println(packetSize);
    Serial.print("From IP : ");
 
    IPAddress remote = Udp.remoteIP();
    //print out the remote connection's IP address
    Serial.print(remote);
 
    Serial.print(" on port : ");
    //print out the remote connection's port
    Serial.println(Udp.remotePort());
  }
 
}

Reference Home

本页面的其他翻译:
en/arduino/libraries/ethernetudpremoteip.txt · 最后更改: 2016/12/25 22:15 (外部编辑)