创客百科

姿势共享,有节操无门槛参与的创客百科,创客动力之源 \ (^_^) /

用户工具

站点工具


en:arduino:libraries:serverwrite

Ethernet : Server class

write()

Description

Write data to all the clients connected to a server.

Syntax

server.write(data)

Parameters

data: the value to write (byte or char)

Returns

byte

write() returns the number of bytes written. It is not necessary to read this.

Example

#include <SPI.h>
#include <Ethernet.h>
 
// network configuration.  gateway and subnet are optional.
 
 // the media access control (ethernet hardware) address for the shield:
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };  
//the IP address for the shield:
byte ip[] = { 10, 0, 0, 177 };    
// the router's gateway address:
byte gateway[] = { 10, 0, 0, 1 };
// the subnet:
byte subnet[] = { 255, 255, 0, 0 };
 
// telnet defaults to port 23
EthernetServer server = EthernetServer(23);
 
void setup()
{
  // initialize the ethernet device
  Ethernet.begin(mac, ip, gateway, subnet);
 
  // start listening for clients
  server.begin();
}
 
void loop()
{
  // if an incoming client connects, there will be bytes available to read:
  EthernetClient client = server.available();
  if (client == true) {
    // read bytes from the incoming client and write them back
    // to any clients connected to the server:
    server.write(client.read());
  }
}

Reference Home

本页面的其他翻译:
en/arduino/libraries/serverwrite.txt · 最后更改: 2016/12/25 22:15 (外部编辑)